We have you covered! Please watch the video below in order to get your Pro Plunge up and running:.

We have you covered! Please watch the video below in order to get your Pro Plunge up and running:&#xA0;<iframe width="100%" src="https://www.youtube.com/embed/Zo29I1PDjfw?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe>

My Pro Plunge is not flowing water, how do I fix it?

Upon receiving your Pro Plunge, you will notice that there is two extra parts which arrived with the tub. 1. Hose Connection. The hose is a key tool for draining water from your Pro Plunge:. - Connect the hose to the drain outlet. - Ensure the hose l

Upon receiving your Pro Plunge, you will notice that there is two extra parts which arrived with the tub. 1. Hose Connection &#xA0;The hose is a key tool for draining water from your Pro Plunge: &#xA0;- Connect the hose to the drain outlet. &#xA0;- Ensure the hose length is sufficient to reach your nearest drain. &#xA0;- Open the valve to allow water to flow out. Make sure the hose is securely positioned to avoid spills. &#xA0;2. RodThe rod is used to adjust the water jets: &#xA0;- Insert the rod into the designated slot to control jet flow. &#xA0;- Move it to open or close the flow as needed. &#xA0;

I have extra parts for my Pro Plunge, Do I need them?

Yes!. Page 17 of the Pro-Plunge manual has a guide on you can connect your phone to Wi-Fi!.

Yes!&#xA0;Page 17 of the Pro-Plunge manual has a guide on you can connect your phone to Wi-Fi!<div class="fr-deletable gorgias-file-attachment__wrapper" contenteditable="false"><div>attach_file <a class="gorgias-file-attachment__anchor-name" href="https://attachments.gorgias.help/z8QbV2PGVNn6ogeP/hc/0e8PW74lgo7DnpGB/2024061220-11b63482-3a42-4bc2-8c8e-67bc8be45a21-coldture%20pro%20plunge%20manual.pdf" rel="noopener noreferrer" target="_blank">Coldture Pro Plunge Manual.pdf</a> 7.1MB</div>close</div>

Can I connect my Pro-Plunge to Wi-Fi?

We have you covered!. The manual is attached below, enjoy!.

We have you covered!&#xA0;The manual is attached below, enjoy!&#xA0;<div class="fr-deletable gorgias-file-attachment__wrapper" contenteditable="false"><div>attach_file <a class="gorgias-file-attachment__anchor-name" href="https://attachments.gorgias.help/z8QbV2PGVNn6ogeP/hc/0e8PW74lgo7DnpGB/2024061121-130d315a-e64d-4627-a936-b8cf43e5ff45-coldture%20pro%20plunge%20manual.pdf" rel="noopener noreferrer" target="_blank">Coldture Pro Plunge Manual.pdf</a> 7.1MB</div>close</div>

Pro Plunge Manual

To change the temperature scale on your device, follow these steps:. From the homepage, tap the Settings button. This will bring you to a screen with several options. Select User Parameters from the menu. At the bottom of the screen, tap the icon to

To change the temperature scale on your device, follow these steps:<ol><li dir="ltr" style="text-decoration:none;">From the homepage, tap the Settings button. This will bring you to a screen with several options.</li><li dir="ltr" style="text-decoration:none;">Select User Parameters from the menu.</li><li dir="ltr" style="text-decoration:none;">At the bottom of the screen, tap the icon to navigate to the next page.</li><li dir="ltr" style="text-decoration:none;">On the left-hand side of the new page, locate the option labeled Target Co-efficient and select it.</li><li dir="ltr" style="text-decoration:none;">Here, you can switch the unit from Fahrenheit to Celsius. Please note that the default unit is Fahrenheit.</li></ol>If you need further assistance, feel free to reach out!

How do I change the temperature scale on my Pro Plunge

Initial Setup Upon Receiving Your Cold Plunge. 1. Closing the Drain Valve. - Locate the valve on the right-hand side of the chiller. - Ensure the valve is closed. A closed valve is perpendicular to the pipe. (Refer to the diagram for clarity.). 2. Re

Initial Setup Upon Receiving Your Cold Plunge&#xA0; 1. Closing the Drain Valve- Locate the valve on the right-hand side of the chiller. &#xA0;- Ensure the valve is closed. A closed valve is perpendicular to the pipe. (Refer to the diagram for clarity.) &#xA0;2. Removing Internal Components&#xA0;- Use a screwdriver to open the grate and push it upward to remove it. &#xA0;- Remove the skimmer and place it beside the grate. &#xA0;- Unscrew the filter and set it aside as well. &#xA0; 3. Breaking the Airlock- Follow the provided instructions or watch the linked video to push water through the system and break the airlock. &#xA0;Airlock video:&#xA0;<a href="https://www.youtube.com/watch?v=Zo29I1PDjfw" id="isPasted">https://www.youtube.com/watch?v=Zo29I1PDjfw</a>

I just received my Pro Plunge, what are my first steps?

Please follow the guide below on how to operate your Pro Plunge control panel:. Control Buttons and Features:. - Power Button: When the unit displays "ON," it is operational. - Mode: Familiarize yourself with the three modes available. For optimal us

Please follow the guide below on how to operate your Pro Plunge control panel:Control Buttons and Features:- Power Button: When the unit displays &quot;ON,&quot; it is operational. &#xA0;- Mode: Familiarize yourself with the three modes available. For optimal use, select the &quot;Cold&quot; mode. &#xA0;- Settings: Use this option to diagnose errors or adjust settings as needed. &#xA0;- Timer: Press this button to access the timing interface. You can leave the unit running continuously if preferred. &#xA0;- LED: Toggle the LED lights on or off using this button. &#xA0;- Temperature Controls: Use the up and down arrows to set your desired temperature. The chiller will automatically maintain the selected temperature. &#xA0;- Lock Button: Activate this to prevent unintended changes to the settings. &#xA0;

How do I operate the Control Panel on my Pro Plunge

Follow the guide below for assistance with draining your Pro Plunge:. Using the Chiller's Built-In Valve:. Using a Submersion Pump (Alternative Method):

How do I drain my Pro Plunge?

Fill out the form and we'll get back to you in under 4 hours

Coldture 

Pro Plunge

(NEW) Classic/Barrel + Chiller Pro Setup Guide

V1 Bundle Setup Guide

Tub only setup video

What is the difference between the Classic & Barrel tub ?

How can I stop a leak coming from the connection to my tub?

How do I clean my tub?

My tub is leaking, what should I do?